FOCUS ON YOUR ENTRUST

FOCUS ON YOUR ENTRUST

The high-quality TECHNOBELT (Neoprene and Polyurethane Belt) has won high praise from many famous original equipment manufacturers and maintenance companies all over the world.

View details
FOCUS ON YOUR ENTRUST

FOCUS ON YOUR ENTRUST

The high-quality TECHNOBELT (Neoprene and Polyurethane Belt) has won high praise from many famous original equipment manufacturers and maintenance companies all over the world.

View details

Ten Types of Conveyor Belts

1. Ordinary Conveyor Belt

Ordinary Conveyor Belt is the main part of the belt conveyor and plays the role of carrying materials. It is widely used in steel, coal, alloy, chemical, building materials, food and other industries. Compared with the transportation method, the use of conveyor belt as a transportation carrier has the advantages of safe operation, convenient use, easy maintenance, low freight, continuity, and shortening of transportation distance. Within a certain range, it has become a substitute for road and railway transportation. This kind of conveyor belt is suitable for conveying massive, granular and powdery materials at room temperature without special corrosiveness under general conditions.

 

2. EP

 

3. High-temperature Resistant Conveyor Belt

The Heat Resistant Conveyor Belt is mainly used for conveying high temperature materials, such as sintered ore, hot coke, cement clinker, hot castings, etc.

 

4. Acid-resistant and Alkali-resistant Conveyor Belt

Acid-resistant and alkali-resistant conveyor belts are suitable for working environments that are in contact with acids and alkalis, such as phosphate fertilizer manufacturing and seawater exposure to salt.

 

5. Whole Core Flame-retardant Conveyor Belt

The whole core flame-retardant conveyor belt has the characteristics of high strength, large capacity, and balanced transportation. At the same time, the product has good flame retardant, antistatic, impact resistance, abrasion resistance, corrosion resistance and other properties. This product is mainly suitable for underground transportation in coal mines, and also for material transportation in metallurgical and chemical industries. The whole core flame retardant conveyor belt can be divided into PVC type and PVG type.

 

6. Inclination Angle of the Pattern Conveyor Belt

The inclination angle of the pattern conveyor belt is 0-45 degrees to prevent the material from sliding down and improve the conveying capacity. According to the different covering properties, it is divided into ordinary, oil-resistant, acid-base, heat-resistant, etc.

 

7. Rubber Lifting Belt

The rubber lifting belt is made of multiple layers of hanging rubber fabric, and there should be covering rubber outside the belt core.

 

8. Cover Rubber of Oil-resistant Conveyor Belt

The cover rubber of oil-resistant conveyor belt adopts nitrile rubber with high acrylonitrile content as the main material.

 

9. Rubber Waterstops

Rubber waterstops are generally used in large concrete structures, such as dams, reservoirs, basements, etc.

 

10. Conveyor belt with corrugated ribs.

图片名称

Industrial Timing Belt Knowledge

26 Aug,2020

Industrial Timing Belt Knowledge Classification of Industrial Timing Belts

MORE
图片名称

Correct Use of Timing Belt

24 Aug,2020

Correct Use of Timing Belt

MORE
图片名称

Common Faults and Solutions for V Belts

14 Aug,2020

A: There is noise: the tension is too large or too small, the solution: the tension should be adjusted. B: Edge wear: 1) Timing belt incident is not parallel 2) Timing belt wheel steering deflection 3) Rising pulley has cracks 4) Bearing has gaps Solution: 1)  Straighten the non-parallel synchronous belt wheels and replace the synchronous belt. 2) Replace the tensioner, suspension wheel and timing belt C: Wear of the surface fabric at the root of the convex tooth (1) Excessive tension (2) Excessive temperature (3) Damage to the synchronous pulley. Solution: (1) Adjust the tension (2) Find the cause of the high temperature and repair it (3) Replace the synchronous pulley D: The flanks of the convex teeth are abnormally worn, the bottom is cracked, and the convex teeth are cut: (1) The tightening force is too large or too small (2) There is foreign body (3) The timing belt pulley or the tension pulley is seized. Solution: (1) Adjust the tension (2) Remove foreign objects (3) Find the cause and repair E: The volume of the surface fabric of the convex teeth: the engine or other parts have liquid leakage. Solution: repair the leaking parts and replace the timing belt F: Movement scratches on the convex teeth: (1) Foreign matter (2) The timing belt is damaged before or during installation Solution: (1) Remove foreign objects (2) Replace the timing belt and install it correctly G: Cracks appear on the back of the synchronous belt: (1) The surrounding temperature is too high or too low (2) There is foreign matter (3) The suspension wheel is sticky (4) Aging Solution: (1) Find the cause and solve it (2) Replace the timing belt and check the door cover (3) Replace the idler wheel and timing belt (4) Replace the timing belt H: The timing belt suddenly breaks: (1) There is a foreign body (2) The tension is too large (3) The timing belt is improperly bent before installation Solution: (1) Remove foreign matter (2) Adjust the tension (3) Replace the timing belt I: Related parts are damaged: (1) There is a gap in the bearing (2) The moving contact surface is damaged Solution: (1) Replace the tensioner, idler and guide wheel

MORE
< 1...828384...90 >

Messages

SUBMIT

Quick Link

Contact Us

DALIAN TECH MACHINERY CO.LTD

Address：No.13 Ganjingzi District, Dalian,   Liaoning  province, China

TEL/WhatsApp：+86-15942618996

                                +86-15566858562

Email：sales@maxpowergroup.cn

Copyright © DALIAN TECH MACHINERY CO.LTD

Powered by: 300.cn  dalian    SEO   Business License