DALIAN TECH MACHINERY CO.LTD

FOCUS ON YOUR ENTRUST

The high-quality TECHNOBELT (Neoprene and Polyurethane Belt) has won high praise from many famous original equipment manufacturers and maintenance companies all over the world.

View details

FOCUS ON YOUR ENTRUST

The high-quality TECHNOBELT (Neoprene and Polyurethane Belt) has won high praise from many famous original equipment manufacturers and maintenance companies all over the world.

View details

Products information

News Center

Home page

Precautions for the Storage, Installation and Use of Timing Belts

1. It is strictly forbidden to forcibly break or bend the synchronous belt excessively to avoid damage to the strong layer and lose its use value.

2. Do not store the synchronous belt in an abnormal bending state for a long time.

3. Keep in a cool place.

4. When installing, please shorten the center distance, loosen the tension pulley, and do not force the timing belt from the lower flange of the timing pulley to drag and grind.

5. The teeth of the timing belt wheel must be at right angles to the direction of rotation of the timing belt.

6. The parallelism of the main shaft of the driving wheel and the driven wheel is controlled at about tangent = 1/1000. Inaccurate shaft position directly affects the service life.

7. It is found that the synchronous belt on the driving wheel is off-side, and the driven wheel should be moved to adjust it, and the pressure of the tensioning wheel should be adjusted.

8. When starting, the center distance changes, the belt is loose, and the tooth skipping occurs. Check whether the pulley frame is loose and whether the shaft positioning is inaccurate. To be adjusted and reinforced.

9. The timing belt must be properly tensioned according to different models and bandwidths when installing.

10. The tension wheel must be installed on the loose side of the driven drive.