DALIAN TECH MACHINERY CO.LTD
FOCUS ON YOUR ENTRUST
The high-quality TECHNOBELT (Neoprene and Polyurethane Belt) has won high praise from many famous original equipment manufacturers and maintenance companies all over the world.
View details
FOCUS ON YOUR ENTRUST
The high-quality TECHNOBELT (Neoprene and Polyurethane Belt) has won high praise from many famous original equipment manufacturers and maintenance companies all over the world.
View detailsHow to Solve the Common Problems of Timing Belt?
Reasons for the early fracture of the Timing Belt:
1. The pulley is too small and the belt is forcibly bent;
2. The load is too large or the passive wheel stops due to an accident, which greatly increases the load force;
3 Does not take into account the inertial force of the passive wheel and passive load.
Timing Belt early breakage solution:
1. Full attention and caution should be taken during handling, storage and installation;
⒉. Check the design and replace it with a pulley with more teeth than the original minimum number;
3. Improve the design.
Reasons for edge wear of Timing Belt:
1. The diameter of the pulley is smaller than the width of the belt;
2. Insufficient bearing rigidity;
3. The parallelism of the wheel is not allowed;
4. The pulley rib is bent.
Timing belt edge wear solution:
1. Check the design;
2. Increase the rigidity of the bearing and fix it firmly;
3. Correct the positioning of the pulley;
4. Correct or replace the rib.
Reasons for tooth surface wear of Timing Belt:
1. Add abrasive dust;
2. The belt tension is too large;
3. The load is too large;
4. The gear teeth are rough.
Timing Belt edge wear solution:
1. Improve the environment and increase the protective cover;
2. Adjust the belt tension;
3. Improve the design;
4. Repair the gear teeth or replace the pulley.
Messages
Contact Us
DALIAN TECH MACHINERY CO.LTD
Address：No.13 Ganjingzi District, Dalian, Liaoning province, China
Email：sales@maxpowergroup.cn