DALIAN TECH MACHINERY CO.LTD
FOCUS ON YOUR ENTRUST
The high-quality TECHNOBELT (Neoprene and Polyurethane Belt) has won high praise from many famous original equipment manufacturers and maintenance companies all over the world.
View details
FOCUS ON YOUR ENTRUST
The high-quality TECHNOBELT (Neoprene and Polyurethane Belt) has won high praise from many famous original equipment manufacturers and maintenance companies all over the world.
View detailsPrecautions During the Installation of The Conveyor Belt
1. Put a flexible shaft on the conveyor belt winding iron core, and set the belt roll up. Before putting it on the shelf, pay attention to the direction of the upper and lower cover glues not to be reversed.
2. In the workplace where it is not suitable to be put on the shelf, the conveyor belt roll can be guided away, and the conveyor belt at the fold should have a large curvature radius to prevent damage to the conveyor belt. It is forbidden to place heavy objects on the conveyor belt at the fold.
3. If the conveyor belt is to be replaced, the new belt can be connected with the old belt, and the unloading and installation of the new conveyor belt can be carried out at the same time.
4. For horizontally running conveyors, the old conveyor can be cut off at any point. For conveyors running in an oblique direction, the cut-off point must be selected to prevent slipping and losing control due to its own weight.
5. After setting the position of the new belt on the conveyor, fix one end of the tape with a clamp, and then connect it with the rope that goes around the roller and the pulley, and the conveyor belt is balanced on the conveyor by the traction device. To prevent the conveyor belt and the frame from squeezing each other.
6. Use a clamp to fix one end of the conveyor belt on the conveyor frame, and use the pulley to tighten the other end until the conveyor belt does not sag significantly on the return roller.
7. Fix the tensioning device 100~150mm away from the starting point.
Messages
Contact Us
DALIAN TECH MACHINERY CO.LTD
Address：No.13 Ganjingzi District, Dalian, Liaoning province, China
Email：sales@maxpowergroup.cn