DALIAN TECH MACHINERY CO.LTD

FOCUS ON YOUR ENTRUST

The high-quality TECHNOBELT (Neoprene and Polyurethane Belt) has won high praise from many famous original equipment manufacturers and maintenance companies all over the world.

View details

FOCUS ON YOUR ENTRUST

The high-quality TECHNOBELT (Neoprene and Polyurethane Belt) has won high praise from many famous original equipment manufacturers and maintenance companies all over the world.

View details

Products information

News Center

Home page

How to maintain PVC Pattern Conveyor Belt?

1. The Pattern Conveyor Belt should be kept clean during transportation and storage, avoid direct sunlight or rain and snow, prevent contact with acids, alkalis, oils, organic solvents and other substances, and be away from the heating device one meter away.

2. The warehouse temperature should be kept between 18-40℃ and the relative humidity should be kept between 50-80% when the Pattern Conveyor Belt is stored.

3. During the storage period of the Pattern Conveyor Belt, it must be placed in a roll without being folded. During the storage period, it should be turned once every season.

4. Conveyor belts of different types and specifications are not suitable to be connected together, and the joints should preferably be glued.

5. The type, structure, specification and number of layers of the conveyor belt should be selected reasonably according to the conditions of use.

6. The operating speed of the conveyor belt should generally not be greater than 2.5 m/s, and the material with large lumpiness and abrasion and the use of fixed unloading devices should be as low as possible.

7. The relationship between the diameter of the transmission roller of the conveyor and the cloth layer of the conveyor belt, the matching of the transmission roller and the reversing roller, and the requirements for the groove angle of the idler should be selected reasonably according to the design requirements of the conveyor.

8. The feeding direction should follow the running direction of the conveyor belt. In order to reduce the impact of the material on the conveyor belt when the material falls, a chute should be used to reduce the material falling distance; the conveyor belt receiving section should shorten the distance between the rollers.