DALIAN TECH MACHINERY CO.LTD
FOCUS ON YOUR ENTRUST
The high-quality TECHNOBELT (Neoprene and Polyurethane Belt) has won high praise from many famous original equipment manufacturers and maintenance companies all over the world.
View details
FOCUS ON YOUR ENTRUST
The high-quality TECHNOBELT (Neoprene and Polyurethane Belt) has won high praise from many famous original equipment manufacturers and maintenance companies all over the world.
View detailsHow to Install Timing Belt Correctly?
1. When installing the Timing Belt, if the center distance of the timing pulleys can be moved, the center distance of the timing pulley must be shortened first, and then the center distance is reset after the timing belt is installed. If there is a tension wheel, first loosen the tension wheel, then install the timing belt, and then install the tension wheel.
2. When installing the timing belt on the timing belt wheel, remember not to use too much force or use a screwdriver to pry the timing belt hard to prevent the tensile layer in the timing belt from breaking unnoticeably. When designing the timing belt wheel, it is best to choose a structure where the two shafts can move closer to each other. If the structure does not allow it, it is best to install the timing belt and the timing belt wheel on the corresponding shaft.
3. Control the proper initial tension.
4. In the synchronous belt drive, the parallelism of the axis of the two pulleys is required to be relatively high, otherwise the synchronous belt will deviate when working, or even jump out of the pulley. The non-parallel axis will cause uneven pressure and cause early wear of the timing belt teeth.
5. The frame supporting the synchronous pulley must have sufficient rigidity, otherwise the synchronous pulley will cause the two axes to be non-parallel during operation.
Messages
Contact Us
DALIAN TECH MACHINERY CO.LTD
Address：No.13 Ganjingzi District, Dalian, Liaoning province, China
Email：sales@maxpowergroup.cn