FOCUS ON YOUR ENTRUST

FOCUS ON YOUR ENTRUST

The high-quality TECHNOBELT (Neoprene and Polyurethane Belt) has won high praise from many famous original equipment manufacturers and maintenance companies all over the world.

View details
FOCUS ON YOUR ENTRUST

FOCUS ON YOUR ENTRUST

The high-quality TECHNOBELT (Neoprene and Polyurethane Belt) has won high praise from many famous original equipment manufacturers and maintenance companies all over the world.

View details

Installation and maintenance of V-belts

·When selecting a V-belt, you must pay attention to its model and choose the correct one to ensure that the top surface of the V-belt is flush with the top surface of the pulley;

·The top surface of the V-belt should be flush with or slightly higher than the outer edge surface of the wheel groove;

·There is a certain gap between the bottom surface and the bottom of the wheel groove to ensure that both sides of the belt are in good contact with the wheel groove and increase the working capacity of the belt drive. If the top surface of the belt is too high above the outer surface of the wheel groove, the contact area between the belt and the wheel groove is reduced, the friction force is reduced, and the belt transmission capacity is reduced. If the top surface of the belt is over the bottom, and the bottom is in contact with the bottom surface of the wheel groove, the friction force sharply reduced or even lost.

图片名称

Industrial Timing Belt Knowledge

26 Aug,2020

Industrial Timing Belt Knowledge Classification of Industrial Timing Belts

MORE
图片名称

Correct Use of Timing Belt

24 Aug,2020

Correct Use of Timing Belt

MORE
图片名称

Common Faults and Solutions for V Belts

14 Aug,2020

A: There is noise: the tension is too large or too small, the solution: the tension should be adjusted. B: Edge wear: 1) Timing belt incident is not parallel 2) Timing belt wheel steering deflection 3) Rising pulley has cracks 4) Bearing has gaps Solution: 1)  Straighten the non-parallel synchronous belt wheels and replace the synchronous belt. 2) Replace the tensioner, suspension wheel and timing belt C: Wear of the surface fabric at the root of the convex tooth (1) Excessive tension (2) Excessive temperature (3) Damage to the synchronous pulley. Solution: (1) Adjust the tension (2) Find the cause of the high temperature and repair it (3) Replace the synchronous pulley D: The flanks of the convex teeth are abnormally worn, the bottom is cracked, and the convex teeth are cut: (1) The tightening force is too large or too small (2) There is foreign body (3) The timing belt pulley or the tension pulley is seized. Solution: (1) Adjust the tension (2) Remove foreign objects (3) Find the cause and repair E: The volume of the surface fabric of the convex teeth: the engine or other parts have liquid leakage. Solution: repair the leaking parts and replace the timing belt F: Movement scratches on the convex teeth: (1) Foreign matter (2) The timing belt is damaged before or during installation Solution: (1) Remove foreign objects (2) Replace the timing belt and install it correctly G: Cracks appear on the back of the synchronous belt: (1) The surrounding temperature is too high or too low (2) There is foreign matter (3) The suspension wheel is sticky (4) Aging Solution: (1) Find the cause and solve it (2) Replace the timing belt and check the door cover (3) Replace the idler wheel and timing belt (4) Replace the timing belt H: The timing belt suddenly breaks: (1) There is a foreign body (2) The tension is too large (3) The timing belt is improperly bent before installation Solution: (1) Remove foreign matter (2) Adjust the tension (3) Replace the timing belt I: Related parts are damaged: (1) There is a gap in the bearing (2) The moving contact surface is damaged Solution: (1) Replace the tensioner, idler and guide wheel

MORE
< 1...828384...90 >

Messages

SUBMIT

Quick Link

Contact Us

DALIAN TECH MACHINERY CO.LTD

Address：No.13 Ganjingzi District, Dalian,   Liaoning  province, China

TEL/WhatsApp：+86-15942618996

                                +86-15566858562

Email：sales@maxpowergroup.cn

Copyright © DALIAN TECH MACHINERY CO.LTD

Powered by: 300.cn  dalian    SEO   Business License